The Most Powerful Aerospace Parts Manufacturer

As a Manufacturer of The Most Powerful Aerospace Parts, YIJIN Hardware is well aware of the air transportation industry, most of which are long-distance transportation for people to travel, or an important transportation tool for transporting a small number of valuables. Aerospace parts maintain strong corrosion resistance. , In addition to oxidation resistance, it should also ensure lightweight and high-strength impact resistance. Under this premise, our slogan is: to provide the aviation industry with the highest precision, high-strength aviation parts. Escort for the aviation industry. We have advanced processing equipment and a deep understanding of the professional skills and knowledge of high-temperature aerospace-grade materials to manufacture the most precise custom CNC-machined aerospace parts while ensuring absolute safety.

Why Choose Our Custom Aviation Cnc Machining Parts Services?

  1. Material: All are made of high-quality materials. While ensuring high strength and high performance, the quality is very light and very
  2. Tailor-made: Customized machining of aviation CNC machining parts and prototypes for you
  3. Advanced technology and experienced team: we have thousands of advanced CNC machining equipment, and we also have thousands of experienced engineers to ensure that every part is of very high quality
  4. Efficient production: With the support of our thousands of advanced CNC machining equipment, we are able to quickly complete orders for mass production
  5. High-quality service: We have a complete set of excellent services, from design to production to testing, and finally to after-sales, our services are perfect and reassuring

What Is Aviation CNC Parts Custom Service

Aviation CNC machining parts customization service is mainly to deal with some characteristics of conventional aviation parts, such as thin wall, easy deformation, complex surface, difficult material processing, etc., but these aviation are usually more critical, so just CNC machining parts service providers with rich experience in CNC machining are required to process and manufacture. With the advantages of experience accumulated over the years and advanced machinery and equipment, YIJIN Hardware can easily and cost-effectively complete the customized machining of Aviation CNC machining parts.

Progress of Aerospace industry

With the continuous progress of the aerospace industry, the research and development of new models have promoted the development of the aerospace parts manufacturing industry. As the machining difficulty of aerospace CNC machining parts such as engine disks, shaft parts, turbine casings, landing gears, etc. continues to increase, various new materials, new structures, and new technologies are emerging in an endless stream, and the requirements for CNC machining technology are also constantly increasing. improve. The aerospace companies are under increasing pressure from CNC machined parts and components manufacturers, and they must be as economical and efficient as possible in order to meet the challenges.

Read More

The use of CNC machining technology and cutting tools depends to a large extent on the requirements for parts, materials and processes. Reducing the wall thickness will cause the parts to become extremely unstable, and the use of appropriate coolant also has a great impact on the service life of the tool. Therefore, the stability and clamping stability of the machine tool must be considered in CNC machining, and CNC CNC machining technology the macro geometry and micro geometry of the cutting tool play a very important role at this time.

Read Less

Yijin Hardware’s general tool path

Roughing: Under the maximum load of the machine tool, in most cases, the largest possible tool should be selected, the largest possible feed amount, and the fastest possible feed. In the case of the same knife, the feed is inversely proportional to the amount of feed. Under normal circumstances, the load of the machine tool is not a problem. The principle of tool selection is mainly based on whether the two-dimensional angle and three-dimensional arc of the product are too small. After the knife is selected, the knife length is fixed. The principle is that the knife length is greater than the processing depth. For large workpieces, it is necessary to consider whether the chuck interferes.

Read More

Light knife: The purpose of the light knife is to achieve the processing requirements of the surface roughness of the workpiece and reserve an appropriate margin. Similarly, the light knife should be as large as possible, and the time as fast as possible, because the fine knife needs a longer time, use the most suitable feed and feed. Under the same feed, the larger the horizontal feed, the faster, the curved surface feed is related to the surface roughness after processing, the size of the feed is related to the surface shape of the curved surface, and the minimum margin is left as long as the surface is not damaged. Quantity, use the largest knife, the fastest speed, and the appropriate feed.

Read Less

Yijin hardware clamping method

Vise clamping: The clamping height should not be less than 10mm, and the clamping height and processing height must be specified when processing the workpiece. The processing height should be about 5mm higher than the vise plane, the purpose is to ensure the firmness, and at the same time not to damage the vise. This kind of clamping is general clamping, and the clamping height is also related to the size of the workpiece. The larger the workpiece, the higher the clamping height.

Read More

Clamping of the splint: the splint is coded on the worktable, and the workpiece is locked on the splint with screws. This kind of clamping is suitable for workpieces with insufficient clamping height and large processing force, generally medium and large workpieces, and the effect is better.
Code iron clamping: When the workpiece is large, the clamping height is not enough, and the wire is not allowed to be locked at the bottom, the code iron is used for clamping. This kind of clamping needs to be clamped twice. The four corners are first coded, the other parts are processed, and then the four sides are coded to process the four corners. During the second clamping, do not let the workpiece loose, yard first and then loosen. You can also code both sides first and process the other two sides.
Clamping of the tool: the diameter is above 10mm, and the clamping length is not less than 30mm; the diameter is less than 10mm, and the clamping length is not less than 20mm. The clamping of the tool must be firm to prevent collision with the tool and direct insertion of the workpiece.

Read Less