Copper Parts, Red Copper Parts
The CNC turning and milling composite parts processed this time are generator rotor parts which applicable in aviation parts, that each motor rotor is equipped with two such rotor parts. In order to make the motor rotor have better electrical conductivity, the material used is red copper.
Main Patrs And Materials: Red Copper
Application Scope of Copper Parts
◆Copper parts with high electrical conductivity: All kinds of electric power, telecommunication transmission cable; Various copper switches, connectors, busbars, electric brushes, rectifiers, motors, generators and copper transformers, sensors and so on; Various electrodes, resistors, capacitors, transistor unit, microwave devices, waveguide tubes, printing cylinders, copper integrated circuits lead frame etc.
◆Copper parts with high thermal conductivity: Power station, chemical, metallurgy, copper building heating, seawater desalination, car water tank and other heat exchangers; Condenser copper tube, duct piece, blast furnace cooling wallboard, copper mold casting, sensor water cooling coil, spacecraft propulsion, combustion chamber burner and so on.
◆Copper parts with right strength: Bolts, copper nuts, washers, containers,hinges, rivets,cap,cover, copper brackets, gears and other structural parts.
◆Copper parts with good corrosion resistance: All kinds of oil transportation, gas,vapor,water or solution copper pipe; Building rainwater collection pipes, roof boarding; Valve, container, dam plate, hard copy.
◆Copper parts has an elegant color: Architectural decorative plate, luminaire, copper sculpture, statue, trophy, board, copper plate, clothing, instrument.
◆Copper parts has excellent antibacterial properties: drinking pipe, pipe fitting, tableware, kitchenware, living utensils, copper sorbet mould, marine ship fender.
◆Copper is non-magnetic: Copper shield.
Red Copper Application And Characteristics
Purple copper, also known as red copper, is copper elemental, because of its color for purple red named. See entry “copper”for various properties. Red copper is industrial pure copper, its melting point is 1083℃, No allotropic transformation, relative density is 8.9, which is five times that of magnesium. The mass of the same volume is about 15% heavier than ordinary steel.
Copper because of its rose red, the surface of the formation of oxide film is purple, so generally called red copper. It is copper containing a certain amount of oxygen, so it is also called oxygen-containing copper.
Red copper is a relatively pure type of copper, which can generally be approximated as pure copper. It has good electrical conductivity and plasticity, but its strength and hardness are relatively poor. Red copper applicable in excellent thermal conductivity, ductility and corrosion resistance. Trace impurities in red copper have serious influence on the electrical conductivity and thermal conductivity of copper. Among them, titanium, phosphorus, iron and silicon significantly reduce the electrical conductivity, while cadmium and zinc have little effect. The solid solubility of sulfur, selenium and tellurium in copper is very small, and they can form brittle compounds with copper, which have little effect on electrical conductivity, but can reduce machining plasticity.
Red copper has good corrosion resistance in the atmosphere, sea water, certain non-oxidizing acids (hydrochloric acid, dilute sulfuric acid), alkali, salt solution and a variety of organic acids (acetic acid, citric acid), and is used in the chemical industry. In addition, red copper has good weldability, can be processed into a variety of semi-finished products and finished products by cold and thermoplastic processing. In the 1970s, the production of red copper is surpass the total production of all other copper alloys.
Red Copper Parts Physical Properties
The trace impurities in red copper have serious impact on the electrical conductivity and thermal conductivity of copper. Among them, titanium, phosphorus, iron and silicon significantly reduce the electrical conductivity, while cadmium and zinc have little effect. The solid solubility of sulfur, selenium and tellurium in copper is very small, and they can form brittle compounds with copper, which have little effect on electrical conductivity, but can reduce machining plasticity. When ordinary red copper is heated in a reducing atmosphere containing hydrogen or carbon monoxide, hydrogen or carbon monoxide can easily interact with cuprous oxide (Cu2O) at the grain boundary to produce high-pressure water vapor or carbon dioxide gas, which can crack the copper. This phenomenon is often referred to as the “hydrogen disease” of copper. Oxygen is harmful to the weldability of red copper. Bismuth or lead and copper form eutectic with low melting point, which makes copper brittle. The brittle bismuth distributed along grain boundaries as a thin film made copper brittle; When the brittle bismuth is distributed in the grain boundary in the form of a thin film, it makes the copper cold and brittle. Phosphorus can significantly reduce the electrical conductivity of red copper, but improve the fluidity of red copper liquid and improve weldability. Proper amount of lead, tellurium and sulfur can improve machinability. The room temperature tensile strength of the annealed copper sheet is 22-25 kgf/mm2, the elongation is 45-50%, and the Brinell hardness (HB) is 35-45.
The thermal conductivity of pure copper is 386.4 w/(m.k).
The use of red copper is much more extensive than pure iron, 50% copper is purified for pure copper by electrolysis every year, used in electrical industry. The red copper mentioned here really needs to be very pure, with a copper content of more than 99.95%. A very small amount of impurities, especially phosphorus, arsenic, aluminum, etc., will greatly reduce the conductivity of copper. Red copper is mainly used for the production of generators, busbars, cables, switching devices, transformers and other electrical equipment and heat conduction equipment such as heat exchanger, pipe, solar heating device flat collector. Oxygen in copper (a small amount of oxygen is easily mixed during copper smelting) has a great impact on conductivity. Copper used in the electrical industry must generally be oxygen-free copper. In addition, lead, antimony, bismuth and other impurities will make the crystallization of copper can not be combined together, resulting in hot brittle, will also affect the processing of pure copper. For this kind of high purity copper, generally finishing by electrolysis: Impurity copper (i.e. blister copper) was used as anode, pure copper as cathode and copper sulfate solution as electrolyte. When the current passes through, the impurity copper on the anode gradually melts, and the pure copper gradually precipitates on the cathode. The resulting copper is 99.99% pure.
Red copper is also used in the production of motor short-circuit rings, electromagnetic heating sensors, and high-power electronic components, wiring bar wiring terminals and so on.
Red copper is also applied ot door, window, handle and other furniture and decoration.
YIJIN Hardware is an excellent turning and milling composite parts supplier. We are committed to providing customers with the most perfect CNC machining products and the excellent CNC manufacturing services.
If you are interested in our products, you are welcome to send your requirements with your drawings to us via email. We are very glad to give you the most sincere service and the most favorable quotation.
Precision Machined Parts,4 Axis CNC Machining
YIJIN Hardware Co., Ltd specializes in precision CNC Machining and provides OEM ODM service:CNC machining/Milling/turning parts, Casting Parts, Metal Stamping Parts, etc.
Mainly serves for Aviation, Electronic products, Furniture, Military Defense, Health Care, Automotive, Communication, Automotive, Racing car, New Energy, Infrastructure Enterprise. (such as high-speed trains and bridges.)
Material: Aluminum, Stainless Steel, Brass, Copper, Carbon Steel, Titanium alloy，Iron, Carbon Fiber, Plastic, Ceramic, Bamboo, Wood, Acrylic Etc.
Processing：CNC lathe, CNC milling and turning, grinding, bending, stamping,casting, etc.
Precision : The accuracy requirement is ± 0.002mm, and the finish requirement is Ra1.0μm.
Surface Treatment：Oxidation, hard Anodizing, Zinc-plated, nickel plated, chrome-plated, silver-plated, gold-plated, etc.
There are many reasons why dozens of small, big and large sized companies from across various industries have reposed their faith on Yijin Hardware for all their CNC Machine manufacturing and other allied services. We offer some obvious advantages and benefits that are quite obvious and irrefutable:
- We have a good track record as far as our products, spare parts and other such allied products are concerned. We have catered to some of the big names across the world. These companies are known for their strictest standards as far as quality, and product specifications are concerned.
- We also offer top class after sales services and also provide the required counseling and guidance before our clients choose our products. We offer both online and on-site services. This makes us stand apart from the rest of the crowd.
- Our rates and prices are competitive without compromising on quality.
- We have the right factories, R&D labs, experienced and qualified staff to handle all types of needs of our customers.
Introduction Of CNC Machining Technology
We also would like to inform our readers that CNC Machining Technology including milling and turning is not easy. It requires the right experience, the right machineries, the right environment and the right investment in technology. We are capable of offering all of them and are capable of meeting the high standards set by our clients.
What Advantages Do We Have In This Industry
Our biggest advantages are the fact that we are experienced and have our objectives clear. We have a good team to take care of the specific and varying needs of our clients. We offer both readymade and customized solutions. Our focus on research and our track record of catering to some of the most demanding customers across the world is a big advantage that not many of our competitors are able to offer. Finally, we always have believed in adhering to the delivery schedules and timelines set by our customers and have very rarely failed in meeting them.
Introduction Of CNC Processing Materials (Such As Wood, Iron, Steel, Plastic, Etc.)
We also would like to inform our customers that CNC processing is not material specific. It encompasses a wide range of materials covering steel, iron, plastic, wood and a host of other materials. Each of them require different types of machines, spare parts, electroplating and machining. These materials are needed for making a wide range of commercial, industrial and domestic products.