Project Description

  • Custom Precision CNC Turning Chrome-Plated Brass Parts, CNC Turning Services Provider
  • Custom Precision CNC Turning Chrome-Plated Brass Parts, CNC Turning Services Provider
  • Custom Precision CNC Turning Chrome-Plated Brass Parts, CNC Turning Services Provider

Custom Precision CNC Turning Chrome-Plated Brass Parts

Product introduction:

This custom precision CNC turning chrome-plated brass part comes from Yijin Hardware, a world famous CNC turning services provider. Used as an accessory for the sanitizer outlet in a civic airplane toilet, this custom precision CNC turning chrome-plated brass part is provided by Yijin Hardware for a famous US airplane manufacturer in batches. Featuring good corrosion resistance and ease of bright surface treatment, brass is chosen mostly for the accessories used for internal surface decoration of an airplane, including exposed parts. As far as CNC turning is concerned, brass has good machinability which makes it easier for machining and treatment.      

About brass H62:

Brass H62 refers to a common brass with an average copper content of 62%, featuring good mechanical properties, good plasticity in thermal state and enough plasticity in cold state, good cutability, ease of soldering and welding, and corrosion resistance but tendency of corrosion failure. Brass H62 is a common brass variety in wide application due to low prices. H62 (brass 46) is much harder in phase β than in phase α at room temperature and thus can be used for the parts that take larger loads. Thermal machining can be performed for the α+β dual phase brass at over 600 ℃. Microscopic structure of the α+β dual phase brass: α is the gloss white solid solution and β is the CuZn based order solid solution. A highfield has an inhibiting effect on the hollows during the H62 brass deformation at high temperature.    

Purpose of brass H62

Brass H62 can be used to manufacture loaded parts by various types of deep drawing and buckling, such as dowels, rivets, gaskets, nuts, conduits, barometer springs, screens and radiators. As a professional custom precision CNC turning and CNC milling services supplier, Yijin Hardware has special research on brass H62 machining and rich machining experience, and is capable of meeting all requirements of every customer for precision brass machining in a perfect way.   

Custom Precision CNC Turning Chrome-Plated Brass Parts, CNC Turning Services Provider

About electroplated decorative chromium

Chromium is a metal of silver color with a slight blue lustre. The chromium coating has very high hardness, which is higher than that of the hardest quenched steel and only second to that of diamonds, and high abrasion resistance. The chromium coating also has good thermal resistance, and its hardness or color does not have obvious change as long as the temperature is below 500 ℃. Chromeplating on the surface polished in advance can lead to a silver blue coating with a specular gloss. Chromium has very high passivation property. A very thin passivation coating is easily produced on a workpiece’s surface and does no change in moist air, retaining its glossy appearances for a long time. Besides brightness and beauty, the passivation coating presents precious metal-like appearances which are good for decoration.

Purpose of electroplated decorative chromium

Since the chromium coating has a lot of outstanding performances, the chromeplating technology is widely used. For example, decorative chromeplating can be used to produce decorative coatings for protective coatings. Decorative chromeplating is required for the exposed parts of a lot of things such as trains, cars, bicycles, medical devices, light industrial products and metal furniture. Because of good glossiness and high light reflection, decorative chromeplating is often performed for retroreflector surfaces. The chromium coating features good hardness and abrasion resistance, so technologies including hard chromium plating, spongy chromium plating, milky white chromium plating and duplex chromium plating are widely used for the machining processes of various parts, such as shafts, cutting tools, engine cylinders, piston rings, measuring instruments and blades.         

Custom Precision CNC Turning Chrome-Plated Brass Parts, CNC Turning Services Provider

Machining Difficulties and Solutions of Custom Precision CNC Turning for Chrome-Plated Brass Parts

Brass tends to deform during CNC turning, so sharp cutters which are made in Germany should be selected. Yijin Hardware only uses the milling cutters and turning cutters made by well-known German companies, so as to guarantee not only the machining accuracy but also the surface finish. In addition, during CNC turning, both the feed speed and the feed amount need attention. Because brass is kind of soft and possibly damaged by bumping, after machining, the operator must clamp or remove the brass parts with care, so as to avoid scratches or bruises. Otherwise, bumpy surfaces will occur after subsequent chromeplating for surface treatment, leading to rough and untidy parts. With a history of over 20 years in the brass machining field, Yijin Hardware has rich practical experience and technical merits in terms of both cutter selection and operating technicians. As far as chromium electroplating is concerned, Yijin Hardware has its own surface treatment factory to handle surface treatment quality problems in a good way, avoiding surface treatment defects caused by second time shipping. Yijin Hardware combines quality CNC machining processes with excellent machining knowledge and reasonable prices.

We ensure to finish work on time based on your budge and provide the test report of each CNC machining part.

We have established excellent standards in cost control, with proven results.

We provide professional CNC machining services for both private and commercial customers.   

FAQ

Q: Who we are?

A: YIJIN Hardware Co., Ltd, reliable stainless steel precision casting manufacturer.

YIJIN Hardware Co., Ltd specializes in precision Machining and provides OEM ODM service. Mainly serves for Aviation, Electronic products, Furniture, Military,Defense, Health Care, Automotive, Communication, Automotive, Racing car, New Energy, Infrastructure Enterprise. (such as high-speed trains and bridges.)

Precision :

The accuracy requirement is ± 0.002mm, and the finish requirement is Ra1.0μm.

Q: Transport Package: Carton, Plastic Bag, Blister Box, Wooden Case, etc

Payment Terms:L/C, T/T, Paypal, Western Union

Express: DHL/UPS

Quality Inspection

High-quality control: 100% QC full inspection before shipment

(Prevent scratching) Packing and shipping

Company Profile: Yijin located in Shenzhen, a young city in China. We combine Quality Workmanship, Superior Knowledge and Reasonable Prices.

We Can Ensure a Job is Done on Time and Budget Proven Results for Setting Exceptional Standards in Cost Control Professional Service for Private and Commercial Customers 20 Years Experience and a Real Focus on Customer Satisfaction.

We combine Quality Workmanship, Superior Knowledge and Reasonable Prices

We Can Ensure a Job is Done on Time and Budget

Proven Results for Setting Exceptional Standards in Cost Control

Professional Service for Private and Commercial Customers

20 Years Experience and a Real Focus on Customer Satisfaction